This plug and play tuner attaches to two easy to access sensors in the
engine bay and works with your factory ECU tuning to remap your boost,
timing, and fueling for optimal performance and reduced turbo lag. It
features a 64mhz processor allowing sensors to be sampled 800 times
per second using dedicated 10 bit digital to analog converters,
ensuring smooth and powerful performance.
The default setting is 3psi over stock and boost can be adjusted using
a BMS data cable or JB4 Mobile adapter. We've measured stock boost on
the Raptor at around 15 psi peak. Raising that to 18psi peak really
wakes up this heavy truck!
Installation is very discrete and unlike flash remaps it quickly
removes without a trace when needed. Fuel economy during normal
driving is unchanged. Compatible with all driving modes.
JB4 adds functionality with a plug and play OBDII CANbus
connection allowing the JB4 to take in critical engine data directly
from the ECU. Including pedal position, throttle position, timing
advance, fuel trims, air/fuel ratio, engine knock, and much more.
Other tuners without CANbus are not able to even monitor this critical
engine data no less incorporate it real time in to their tuning
The JB4 also features multiple maps based on this expanded engine
criteria, smoother partial throttle performance, additional engine
safety systems such as lean run or over boost, more advanced logging
for those wanting to experience with different fuels and E85 mixtures,
boost by gear to improve traction, the ability to read and delete fault codes, and much more to come via free firmware updates.
For more information join the discussion here: http://www.n54tech.com/forums/showthread.php?t=5143