Burger Motorsports BMW Performance Products
|
|
Juice Box Stage 2 Pinout $99
Our entry level / budget tuner, the Stage 2 increases boost by 2-3psi and adds 30-40hp to the wheels. There is no better value in N54 tuning. Installs in the ECU area using the included OEM BMW connectors. Simply unplug two factory wires and insert the matching JB2 wires. Completely reversible and detection code free.
For BMW 135, 335, 535, Z4, and X6 Twin Turbo.
MORE... |
|
JB Plus Quick Install (JB+) $279
A true plug and play tune offering safe and adjustable 30-60whp gains. Can be installed and removed in minutes without any tools. At the default setting of +2.75psi average increases are 40 Horsepower and 50 ft lbs Torque to the wheels. For those looking to take things to the max up to +4.75psi can be quickly dialed in! Does not trigger codes and does not require entering the ECU area for installation. For BMW 135, 335, 535,
Z4, and X6 Twin Turbo.
MORE... |
|
Juice Box Stage 3 (JB3) Pinout $349
Identical to Stage 3 Plug and Play only utilizing a pin out style harness which takes ~20-30 min longer to install and remove. Suggested for more experienced enthusiasts. No cutting required and easy to remove. Can be updated to the Plug and Play harness at a later time by purchasing the PnP upgrade.
For BMW 135, 335, 535, Z4, and X6 Twin Turbo.
MORE... |
|
Juice Box Stage 3 (JB3) Plug & Play $579
The latest generation of the Juice Box Performance Tuner features completely new microcontroller based hardware, numerous additional input/output channels, integrated safety features, a plug and play wiring harness, and gains of up to 80 horsepower and 80 torque to the wheels on an otherwise stock car
on pump gas! For BMW 135, 335, 535, Z4, and X6 Twin Turbo.
MORE... |
|
NEW! BMS Power Box (PBX) Non-Turbo Tuner $279
The BMS Power Box is a piggyback style performance chip for the BMW N51/N52 motor. It features easy installation and removal, gas pedal switching between 7 performance maps, throttle pedal remapping for snappier response, and dyno gains of 8-10+ Horsepower and 8-10+ lb-ft Torque. Finally you can enjoy the car how it should have come from the factory!
MORE... |
|
Bavarian Technic Scanner and Software $287
A true "game changing" product, the Bavarian Technic does everything a GT1/OPS system can and much more for a fraction of the price. Including reading/deleting extended codes, tuner detection codes, and airbag codes. Performs high speed data logging of over 600 parameters including knock retard, adaptation values, O2 sensors, boost targets, etc. Works on 2001+ BMWs.
MORE... |
 |
NEW! AMS BMW 135 / 335 Intercooler $899
The AMS BMW 135 / 335 Front Mount Intercooler is the best performing direct bolt on you can buy. Simply by bolting on this intercooler on a stock car you can expect over 10 wheel horsepower gains. cars running increased boost due to a tune have seen 40 plus wheel horsepower near redline! This intercooler has over 49% more internal flow area than the stock BMW intercooler.
MORE... |
|
NEW! cp-e™ BMW 135i Catback Exhaust System $1399
Bolt on more horsepower & torque! The Perfect blend of Performance, Sound, and Appearance. We improved upon the factory system by enlarging the mid-pipes by approximately 0.25" to accommodate increased turbocharger duty. It gives the 135i a more aggressive character without becoming overwhelming. It gives the 135i a more aggressive character without becoming overwhelming.MORE... |
|
NEW! AMS BMW 335i Cat Back Exhaust System $1799
The AMS BMW 335 (E90/E92) 3” exhaust is the most unique and lightweight system on the market. Developed to optimize exhaust flow while shedding 40lbs of weight from the factory cat-back, this is the ultimate exhaust system for your BMW!
MORE... |
|
NEW! ar design BMW 135 / 335 3" Downpipes $699
Burger Motorsports is extremely excited to present ar design's BMW 135 and 335i 3" Hi-Flo™ Premium downpipes! The only TRUE 3" downpipes currently on the market! In addition to an intoxicating and exotic sound, these downpipes add significant power and virtually eliminate turbo lag, making the
N54 engine even more responsive!
MORE... |
|
NEW! cp-e™ BMW 135i 3" Downpipes $672
cp-e™ is very proud to offer cast stainless steel performance downpipes for the BMW N54 twin-turbo engine. The cp-e™ downpipes are the product of nearly 10-months of design work, and represent the latest in reverse-engineering and manufacturing technology. The downpipes are constructed from heavy gauge American-made 304-stainless steel, and also carry a lifetime warranty. MORE... |
 |
NEW! NST BMW 135 / 335 Light Weight Crank Pulley $229
Bolt on an additional 10+ Horsepower at the wheels! This BMW 135 & 335 light weight crank pulley is designed to regain wasted horsepower and channel that power to your wheels by significantly reducing the weight and moment of inertia of the factory pulley.
It’s precisely machined for a direct fit and is visually identical to stock.
MORE... |
|
Methanol Injection $355
Methanol/Alcohol/Water injection, commonly referred to as "meth", allows you to make tremendous amounts of power on pump gas. The effect is similar to running 104 octane all the time, with additional cooling benefits allowing for more power than you could ever make on race gas alone. MORE... |
|
NEW! JB3 2.0 6’ Datalogging Cable $35
This proprietary USB cable connects the JB3 G3 control box to your laptop, for use with 2.0s new datalogging, tuning, and map loading software. Cable may be left in engine bay and routed in the window or door when needed for a simple install. Alternatively it may also be routed behind the ECU in to the glove box for a clean install and on the fly access.
MORE... |
|
NEW! BMS Downpipe Fix v3 $80
Now fully adjustable! Eliminates timing pull, oxygen sensor miscalibration, and tuning headaches associated with high flow
exhaust systems. Installs in the ECU area and is compatible with all tunes.
MORE... |
|
NEW! BMW 135i Integrated Digital Boost Gauge $399
Custom digital boost gauge and map switch flawlessly integrated in to the driver side vent. Includes PnP wiring harness and all required hardware, including revised vent cover. Installs in 20 minutes and is easily removable. Harness plugs in to JB3 or other piggyback systems for selection of up to 4 maps. For BMW 135i only.
MORE... |
|
BMW 335i/xi Digital Interface and Boost Gauge $399
Custom digital boost gauge and map switch integrated in to the driver side vent. Includes PnP wiring harness and all required hardware, including revised vent cover. Installs in 20 minutes and is easily removable. Harness plugs in to JB3 or other piggyback systems for selection of up to 4 maps. For 335i and 335xi only.
MORE... |
|
Add OEM BMW Paddle Shifters $229
Our plug and play harness allows you to add OEM M3 or Sport paddle shifters to any 2005+ Steptronic transmission without an expensive ECU reflash, cutting, messy wiring, or service codes. Simply unplug the factory connectors and plug in our harness. In addition to the harness we provide you with the OEM BMW part numbers required to complete the retrofit.
MORE... |
|
BMS BMW Performance Intake $119
Offering 8-15 rear wheel horsepower gains, the BMS intake replaces your restrictive factory airbox assembly with a custom built K&N brand filter. Features 20% more filter surface area and much better sound than the factory airbox, all without raising your intake air temperatures.
Fits BMW 135 / 335 / 535.
MORE... |
|
BMS Dual Cone BMW Performance Intake $139
Featuring quality S&B inverted cone filters our dual cone intake offers the highest possible flow in an attractive and easy to install package. Not to mention intoxicating sound. Includes anodized black aluminum couplers and all required hardware.
Fits BMW 135 / 335 / 535. The best value in N54 intakes!
MORE... |
|
NEW! BMS Drop In Filter $59
Introducing the BMS drop in filter, offering quick installation and the best flow of any available drop in filter. It's manufactured by S&B to the same exacting standards as our dual cone filters.
MORE... |
 |
NEW! K&N Non-Turbo Drop In Air Filter $49
K&N’s replacement high flow air filters for BMW are designed to increase horsepower and acceleration while providing excellent filtration. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. To install simply remove the disposable air filter and replace it with a K&N.
MORE... |
|
Modified Clutch Valve $20
A must have for any E90 stick shift, the BMS clutch valve replaces your factory clutch delay valve with a professionally ported valve. The result is quicker shifts, longer clutch life, and improved 0-60 times. Installs quickly and is visually identical to the factory valve. Fits BMW 128 / 135 / 328 / 335 equipped with manual transmission.
MORE... |
|
Stage 3 Plug & Play Upgrade $230
Upgrade your Juice Box Stage 3 professional / pinout harness to a plug and play harness with this upgrade kit. Includes four plug and play subconnectors and reuses your JB3 pinout harness.
MORE...
|
|
Stage 3 Update Chip $20
For those that do not want the JB3 chip burner for free software updates, this chip comes loaded with the latest JB3 mapping.
MORE... |
|
NEW! Burger Motorsports Logo Stickers FREE
A Must for any Juice Box equipped BMW! The last thing they see before the're in the dust.
Burger Motorsports high quality vinyl stickers. Just rub on and peel the applicator tape off.
Available in White or Black.
MORE... |
|
|
